HDG229
This is the support page for HDG229.
Here you will find all the material we provide: datasheets, documentation, driver source code and Android HAL. Refer to the
getting started guide to learn how to quickly get the module up and running.
Product Overview
8x8mm
SiP integrating 802.11 a/b/g/n dual band and Bluetooth 5 Classic & Low Energy
The HDG229 SiP is based on a 88W8977 NXP chipset.
Evaluation kit
You can use our
HDA229 evaluation kit to test the HDG229.
First time user?
Features
Key Features
- Support for 802.11a/b/g/n
- Data Rates: 72 Mbps (20 MHz channel), 150Mbps (40 MHz channel)
- Modulation: BPSK, CCK, QPSK, 16QAM, 64QAM for WLAN
- Fully functional Bluetooth 5 baseband
- Open WEP, WPA/WPA2 encryption
- Minimum of external components
- Low power consumption due to efficient PA design and power off mode
- Supporting STA and AP operation mode
- Supports BT-WLAN coexistence and ISM-LTE coexistence
- Extensive DMA hardware support for data flow to reduce CPU load.
- Advanced power management for optimum power consumption at varying load.
- External interfaces 4 bit SDIO 3.0 for WLAN and PCM for BT interface
- On-board High Frequency High Precision Oscillator 26 MHz
- Small footprint 8.0 x 8.0 mm (64mm2) 42-pin LGA package
- RoHS Compliant
Getting Started
Quick start
Don't know where to start? Just follow these steps to get up and running in no-time.
- Buy an evaluation board from one of our distributors. A complete list can be found at List of Distributor or contact sales@hd-wireless.se.
- Download the required software. Correct files for this product can be found under the Downloads tab.
- Follow the Getting Started document for a step-by-step guide to get you up and running in no time.
Documents
You need to
Log In to access this content.
If you do not have an account yet, please
register.
Downloads
You need to
Log In to access this content.
If you do not have an account yet, please
register.
Order information
You can find our products through
our distributors, or contact us at
sales@hd-wireless.se.
| Part No |
Description |
| HDG229-N-2 |
HDG229 module, 8x8 mm 42-pin LGA package on Tape & Reel |
| HDG229-N-3 |
HDG229 module, 8x8 mm 42-pin LGA package on Tray |
| HDA229 |
Development board for HDG229, SD card format, SDIO interface (optional UART interface for Bluetooth only) |
Guides & Howtos
FAQ
hd-wireless.com